STANDARD FRAME TYPES
Standing seam roofing is the most recent innovation in roofing. It’s also called the “screw-less” or “hole-free” system.
Clips with male and female ends are screwed onto the purlin and then joined to the next roofing panel. In this system, the roofing sheets aren’t cut, so the customer gets a leakproof roof.
This interlocking seam on the side laps makes the roof sheet last longer because there are no protrusions on the roof sheet.
Most roofs are put on using the seaming method. With this, you can cover even low-sloping structures without worrying about water seeping in. It can survive bad weather and heavy to torrential rain. It can also be used with a double-layer insulation system.
Moonwalk Infraprojects provides a state-of-the-art concealed fixed and zipped-up standing seam system for a seamless, watertight roof.
As one of India’s top exporters, Moonwalk Infraprojects offers competitive prices on its high-quality standing seam roof sheets.
BENEFITS OF A STANDING SEAM ROOF SYSTEM IN INDIA
Standing-seam Roof Panels Are Weatherproof
When you buy a metal roof, you can choose between two types of fastening systems: hidden fasteners and exposed fasteners. Standing seam panels are a type of metal roofing panel with hidden fasteners. This roofing system is the most weather-resistant.
Hidden Fastener vs. Exposed Fastener Metal Roof
The fastening system is the best thing about a standing seam roof panel. Standing seam is a type of metal roofing panel with hidden fasteners. This means that hidden clips and fasteners are used to attach the panels to the substrate. The screws don’t go all the way through the metal panel.
This is important because, unlike a metal roof panel with exposed fasteners, the panel won’t have thousands of screw holes. With a standing seam roof, there are no places where water could leak in.
Standing Seam Roofing Specifics
The seams are the weakest part of a metal roof, and that’s where water is most likely to get in. Most standing seam panels have seams that are between 1.75 and 2 inches high. When the seam is 2″ above the height of the panels, roof leaks are much less likely to happen. Standing seam roofs are made to expand and contract as needed. The panels are made to allow thermal movement as the temperature goes from hot to cold.
Standing-Seam Metal Roof Offer Long Life
People often call standing seam metal roofing a “Lifetime Roof,” which means that you should only need to buy one roof for your house in your whole life. It will pay off in the long run. Metal roofs with standing seams can last between 40 and 70 years. Metal can stand up to harsh weather and winds of up to 140 mph. It won’t fall down from its own weight during a snowstorm or a heavy downpour.
Standing seam roof panels don’t catch fire.
A metal roof is the first thing that can keep your house from burning down. Standing seam metal roofing panels are a great way to protect your home from fire. Metal roofing is not flammable, and a Class A fire rating is given to the standing seam when it is installed correctly. This means that the roof can handle a lot of fire from outside the building.
Standing-seam metal panels make roof maintenance easier.
Since the fasteners are hidden, the weather can’t get to them. This means that the screws don’t have any washers that could wear out and need to be replaced. Hidden fasteners are the main reason why standing seam metal roof panels need less maintenance than other types. With a standing seam roof, it doesn’t matter if the roof grows or shrinks. So, you won’t have to worry about going up on your roof every so often to make sure the fasteners haven’t come loose and then tightening them again.
Moonwalk Infraprojects is one of the most trusted Standing Roof Sheets Manufacturers in India. Our sheets are made with high-quality materials and modern techniques that are in line with industry standards.